Electronic Components And Equipment Pneumatic Bump Test Machine CE
Product description:
The GSKA20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working.
Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability.
Control the frequency of collisions by adjusting the gas pressure to achieve continuous high-frequency collisions.
Test time and collision frequency can be set arbitrarily, and it will stop automatically after the test is completed
Shock test for battery packs more than 500kg, we recommend use KRD20 bump test machine
GSKA20 bump test machine is suitable for large size battery pack, and with middle acceleration and large pulse duration, such as:
1. 16g～60ms
2. 24g～16ms
3. 25g～15ms
4. 50g～11ms
5. 50g～15ms
Technical Specifications:
| Model Parameters | GSKA 20－50 | GSKA 20－100 | GSKA 20－200 | GSKA 20－500 | GSKA 20－800 | GSKA 20－1000 | GSKA 20－1500 | GSKA 20－2000 | GSKA 30－2000 |
| Load (kg) | 50 | 100 | 200 | 500 | 800 | 1000 | 1500 | 2000 | 2000 |
| Table Size (mm) | 500×
500 | 600×
600 | 800×
800 | 1000×
1000 | 1500×
1500 | 1800×
1800 | 2000×
2000 | 2500×
2000 | 2500×
2500 |
| Shock Waveform | half sine wave |
| Peak Acceleration (g) | 3～150 | 3～120 | 3～100 | 3～80 | 4～60 | 5～50 | 5～50 | 5～40 | 5～30 |
| Pulse duration (ms) | 2～30 | 3～30 | 5～30 | 6~30 | 6~30 | 8~30 | 11~30 |
| Bump Rate (Times/Min) | 1~120 | 1~120 | 1~100 | 1~100 | 1-80 | 1~60 | 1-30 | 1-20 |
| Overall Dimension (mm) | 1050×
1050 ×1300 | 1050×
1050 ×1300 | 1100×
1100 ×1300 | 1200×
1200×
1500 | 1500×
1500×
1600 | 1800×
1800×
1600 | 2000×
2000×
1850 | 2500×
2000×
1950 | 2500×
2500×
2100 |
| Weight (kg) | 1500 | 1500 | 2000 | 2500 | 2800 | 7500 | 8500 | 9500 | 11000 |
| Power Supply | AC220V ± 10%,50Hz |
| Air Source | ≤1MPa |
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 80% non-condense |
| Standards | MIL-STD-810F IEC68-2-29 |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Product Tags:
|
|
Electronic Components And Equipment Pneumatic Bump Test Machine CE Images
|
